E-MASK® R-50EP/R-100/R-200/R-300/HR6010/HR6030

Surface protection material developed for protecting the surface of electronic and optical parts, which hardly increases the adhesive strength.

Overview

E-MASK® Series and HR Series are polyethylene-based surface protective materials developed utilizing Nitto Denko’s proprietary adhesive synthesis technologies. Both series are especially suitable for surface protective of LCD polarizing films, hard-coat or non-glare treated acrylic plates, and polyester films during processing and transportation.

Features

• Minimal change in adhesive strength following application ensures easy peeling.
• Superior transparency enables inspection of the surface condition of the substrate without removing the tape.
• Tape is pressure sensitive, and easily applied with a laminator.

Applications

• Surface protection for optical film, such as polarizing film (e.g. during LCD shipping)

Precoutions

• Avoid sunlight and store at room temperature and moderate humidity.
• Do not press too strong when applying. This may cause the end of the tape to peel.
• If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
• For use under severe conditions, please test and evaluate the product thoroughly beforehand.
• Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
• Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
• Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
• Especially for applications against natural substrate (marble stone, lumber, etc) please contact our sales representative in charge.
• When painting is performed after peeling off the surface protection material, please thoroughly examine the surface cleaning, substrate treatment, baking conditions, etc. and check the adhesion of the paint before use.
• The above datasheet is a sample observation value under certain testing conditions, not guaranteed performance.
• The quality, performance, and/or functions of this product will differ according to the conditions of use. Please contact our department in charge for full details of this product.
• Under severe conditions, this product may show difference between the sample observed values and the actual performance. Please test and evaluate the product thoroughly for your safety and better results.
• This product and/or its features may change or be discontinued without any prior notice.
• The intellectual property rights of this document belongs to Nitto Denko Corporation. Please contact our department in charge for usage not in accordance of the intended use. Copying and/or reproducing the document without notice are strictly prohibited. All rights reserved.