Page's Head

It is a support menu from here.

Main Menu

Letter Size
Small
Middle
Large

Surface Protective Materials for Electronics
Optical Elements E-MASK® R・HR Series

Low contamination type developed for surface protective of electronic and optical parts.
Outline
E-MASK R Series and HR Series are polyethylene-based surface protective materials developed utilizing Nitto Denko’s proprietary adhesive synthesis technologies. Both series are especially suitable for surface protective of LCD polarizing films, hard-coat or non-glare treated acrylic plates, and polyester films during processing and transportation.
Features
  • Minimal change in adhesive strength following application ensures easy peeling.
  • Superior transparency enables inspection of the surface condition of the substrate without removing the tape.
  • Tape is pressure sensitive, and easily applied with a laminator.
Applications
  • Surface protective for optical film, such as polarizing film (e.g. during LCD shipping)
General properties
Item Thickness [mm]*1 Adhesive strength[N/20mm] *2
E-MASK® R-50EP 0.060 0.10
E-MASK® R-100 0.065 0.30
E-MASK® R-200 0.065 0.50
E-MASK® R-300 0.070 0.80
E-MASK® HR-6010 0.063 0.50
E-MASK® HR-6030 0.070 0.90
[Test method]
*1:Nominal thickness
*2:Based on JIS Z-0237
Adherent: Acrylic plate, Tensile speed: 300mm/min, Peeling angle: 180°
Precautions
  • Avoid sunlight and store at room temperature and moderate humidity.
  • Do not press too strong when applying. This may cause the end of the tape to peel.
  • If applying to surfaces treated with machining oil, degrease the surface carefully. Any remains will be a cause for surface contamination or adhesive residue.
  • For use under severe conditions, please test and evaluate the product thoroughly beforehand.
  • Painting, plating, etching, or gluing the surface after peeling the tape may be troublesome due to the small amount of residue of the adhesive. Please inspect under actual situations thoroughly before application.
  • Painted boards, depending on conditions such as paint baking, may cause the tape to peel uneasily or peel off the paint together. Please evaluate thoroughly beforehand.
  • Surface treated boards such as alumite, depending on treatment conditions, may show different properties (peeling) of SPV. Please evaluate thoroughly beforehand.
  • Especially for applications against natural substrate (marble stone, lumber, ｅｔｃ) please contact our sales representative in charge.

Contact Us

Footer Area